판매가 | 35,000원 |
---|---|
적립금 | 175원 (0.50%) |
배송비 | 3,000원 (80,000원 이상 구매 시 무료) |
수량 |
SNS 상품홍보 | |
---|
구분 | |
---|---|
(최소주문수량 1개 이상 / 최대주문수량 0개 이하)
사이즈 가이드
80~130급 마이크로급 기체에적합합니다
FEATURES
1. Mini size: 17x24 mm.
2. Light Weight: 2.11g
3. Operating Range: 500m.
4. S-bus output without inverted (don’t need inverted on FC).
5. 8 channel output.
6. Telemetry HUB.
7. Input voltage: 4-6V (normal 5V).
8. Compatibility: FrSky Taranis, Taranis Plus, & XJT module
NOTE: Regarding F3 chip, you need go to CLI on cleanflight and
set sbus_inversion = OFF
save
Configuration
Following, there’s some useful info for the setup and use of your Furious Mini RX.
1. Binding the receiver to the Frsky Taranis
In the Taranis, go to MODE SETUP (page 2) in the model configuration.
Go to Mode inside Internal RF and select D8.
Press and hold the receiver bind button and plug your battery in to turn the receiver on.
Release the button. A green LED lights up in the receiver.
Going back to the Taranis; we press BIND. The transmitter beeps, indicating it’s in bind mode.
Wait for the green LED on the receiver to turn off. The binding procedure has finished.
Exit the BIND mode in the Taranis.
Unplug the battery to turn off the receiver.
2. Binding the receiver to the XJT module
Using the dip switches of the XJT module, select the D8 mode. They shoud be in the following position: switch 1 = ON, switch 2 = OFF.
Press and hold the receiver bind button and plug your battery in to turn the receiver on.
Release the button. A green LED lights up in the receiver.
Press and hold the bind button and turn the transmitter on.
Release the button. A green light shoud blink in the module, indicating it’s in bind mode.
Wait for the green LED on the receiver to turn off. The binding procedure has finished.
Turn the transmitter off.
Unplug the battery to turn off the receiver.
고객센터 02-6202-5555