[MATEK] RGB LED WS2812B w/ MCU(5V LED STRIP)
Matek RGB 8 LED WS2812B 7-Colors Board With MCU For FPV Multicopter
- 마텍 BAR형 LED입니다.
- 7가지 색을 낼 수 있습니다.
- 뒷면의 버튼을 이용해 색을 교체 할 수 있습니다.
- 5V용 입니다.
- 간단히 서보잭으로 5V전류를 공급해주면 됩니다.
구성
LED바 1개
Description:
Brand: Matek
Item Name: Matek RGB 8 LED WS2812B 7-Colors Board With MCU
Working voltage range: 4.5~5.2V DC
Power of MCU mode (5V IN): White: 1.8W /0.36A
Green/Red/Blue: 0.6W/0.12A
Yellow/Cyan/Magenta: 1.2W/0.24A
Mounting: 30mm, Φ2.6mm
Size: 65x10mm
Weight: 3g
Features:
Built-in 8pcs RGB LED WS2812B & 1pc MCU
Dual modes: MCU control & Cleanflight control
MCU mode: 7 colors (White, Green, Red, Blue, Yellow, Cyan, Magenta)
4 status (Constant light, Slow flash, Fast flash, Voilent flash)
CF mode: support CC3D, Naze32, SPRacingF3, etc. with CleanFlight firmware
How to use:
1. Connect the LED strip to 5V power source (Pin 5V & GND).
2. Press the button, scroll through the color within White, Green, Red, Blue, Yellow, Cyan, Magenta.
3. Hold the button 2s to enter the setting of LED mode, then press the button to set it within
MCU mode (the 1st LED Constant light, Slow flash, Fast flash, Voilent flash)
CF mode (the 1st LED OFF)
4. The mode will be saved if no action within 5 seconds.
5. If MCU mode is choosed & saved, the color can be altered by pressing the button.
6. If CF mode is choosed & saved, Pls connect the DIN to the Flight Controller.
CC3D: Pin Motor-5
Naze32: RC5 pad
SPRacing F3: LED_STRIP pad
수량을 선택해주세요.
26)
