상세설명
경기장 트랙을 따라 기체가 비행 중 설치된 각 폰더의 고유인식 번호를 IR 기술을 이용하여 쉼 없이 전송 하여 시작/출발 게이트에 설치된 수신기록 장치에 전달 되는 매 순간 비행 기록 랩타임을 기록합니다.
제품기능
l Compatible with iLAP receiver systems, as used by by most racing clubs worldwide.
l Two LEDs which can be used for a wider transmission angle or clockwise/anti-clockwise tracks.
l Reduces your overall cost for a race-ready air-craft.
l No fiddling around trying to fit transponders in a hurry on race-day. Just turn up at the race and have the race officials scan your transponder and you're ready!
제품사양
Built-in 5v regulator (BEC)
The built-in 5V 1 AMP regulator means you don't need a seperate 5V regulator. Plenty of power for your FC, RX, LEDs, etc.
Range
Works at distances up to 5m, even outdoors in sunlight. Use more track-side receivers to further increase sensitivity.
Dual IR LEDs
Two LEDs allows you to position for greater intensity or for clockwise and anti-clockwise tracks.
iLAP Compatible
Works with the most popular transponder receiver system currently in-use worldwide today.
Highspeed
Uses a high-speed transmission to eliminate interference.
7-Digit code
Longer codes, compared to other systems, means you won't have issues with duplicate codes.
Flexible Form Factor
Mount using 30.5mm mount holes and stack above your FC. Or remove the tabs, heat-shrink it and use velcro to mount as appropriate.
Flexible Power Options
Power using 2S-5S Lipo OR power from existing 5V supply, you choose.
Suitable for racing clubs or pilot ownership
Flexible design allows racing club owners to fit them with standard 3 pin cable for use on race days.
내 용 물
l Measures 36x13.5mm with 2 x 30.5mm mounting hole tabs
l Measures 26x13.5mm with tabs removed
l 무게 ~3 grams
l 5V 전압, 1 AMP
l 전원표시 LED
l 상태표시 LED
l 배터리/전원 용 2핀 홀 1개.
l 5V in/out 용 2핀 홀 1개.
l 1x 4pin bottom mounted, JST-SH socket for SWD debugging
l 1x 4pin bottom mounted, JST-SH socket for UART 1개
l 2핀 IR LEDs (supplied). 2개
l r자(오른각) 및 일자 핀 헤드
수량을 선택해주세요.
100)
2,000원
